Investing a little to save a little.

Happy New-ish Year!

While I’ve been away from the blog, the sewing machine was humming, fabrics were pulled off the shelves and more new fabrics were stuffed back into the cupboards over the past 6 weeks or so. And there were a lot of balls in the air – kids, work, house chores, sewing, appointments at the doctors, etc. With the Chinese New Year coming up soon, there are of course more shopping, cleaning and scheduling to do. But I’m finally able to see the light as work and family schedules are falling into their places.

The sewing has not stopped! I started on a faux chenille blanket for a friend’s upcoming new baby and completed that over the weekend. The main fabric is a quilting cotton Oliver & S fabric, layered with 1 x Kona cotton, 1 x cotton/linen blend and 1 x cotton flannel. Binding the blanket became an issue for me – I like to hand sew down binding for the neat/invisible look. But I was short of time and I was not sure I wanted to hand sew down through fiddly layers of cut fabrics.

I decided that I would machine sew the binding down and went with a store-bought bias binding this time. I tried to clip the binding down, but I didn’t feel confident that I would catch the bottom part of the bind when I top-stitch it down. I decided to invest a little more time so that I will get it right and perfect the 1st time. Out came the Japanese basting needle and threads and I took my time to fold the binding over the blanket.

This morning I completed the sewing at the machine and sent it off to the wash.

I cut the chenille part with my Clover slash cutter that I bought from Rosie’s store a few years ago. You can use a pair of regular scissors, but again, its good to spend a little for a nifty little tool that will give you great results and save you lots more time (and also reduce strain on your hands). This cutter comes with 2 guides – one for straight slash cutting (as pictured below) and for shorter guide for curved lines. Minimum width of the ‘channel’ is about 1/4″ (6mm), and for this blanket I sewed my lines about 1/2″ apart.

Can’t wait to see this blankey wrapped around its new owner soon!